THERE'S STILL TIME TO REGISTER...

 

Design and Build a PCB with Embedded Passive Components and HDI/Microvia
An Interactive Workshop Hosted by NSWC - Crane

June 19 & 20, 2007

Crane, IN

 

The course includes instructions on how to use virtually any PCB CAD
system for Embedded Passive and HDI/Microvia design. Following this,
Mentor Graphics will provide work-stations and instructions for the
participants to go through the design processes for a hands-on
experience incorporating Embedded Passives and HDI/Microvia using an
automated tool set.

Learn how and why Embedded Passives technology, in combination with
HDI/Microvia technology, will improve signal integrity of circuits and
lower common mode noise that often leads to EMI. You will also learn how
these technologies improve performance of even the most sensitive analog
circuit and why gains in digital performance are always realized when
either embedded or HDI/Microvia technology are employed. Experience
designing and fabricating a PCB with HDI/Microvia and Embedded Passives.
Participants will work at a CAD workstation, design a PCB with
HDI/Microvia and Embedded Passive Components, and then build the PCB in
NSWC Crane's state of the art PCB manufacturing facility.



Take a giant leap forward in advancing your technical skills. Join
others in this unique opportunity to learn the benefits of HDI/Microvia
and Embedded Passive Components.


Take advantage of facilities available at:

Fairfield Inn
120 S. Fairfield Dr.
Bloomington, IN 47404 
(812) 331-1122

($84 per night) 

When calling the hotel, mention NSWC-Crane to get the corporate rate of
$84 per night. 

 

Combined Bachelors Officers Quarters (BOQ)
Building 3319 

300 Highway 361
Crane, IN 47522-5001 
(812) 854-1176

($25 per night) 




Please contact the hotel directly to make a sleeping room reservation. 

 

Register today to secure a seat!  To register for this workshop, please
cut and paste www.ipc.org/EPCrane0607 into your browser and download the
registration form.

 

 


---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------