TECHNET Archives

May 2007

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Steve Gregory <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Steve Gregory <[log in to unmask]>
Date:
Tue, 29 May 2007 07:35:55 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (184 lines)
Hi Sly!

Laguna Seca? Now you're talking! That's one of my ol' stomping grounds
when I was out in California. I was part of the safety crew that worked
some of the big motorcycle races (AMA and FIM races) at Laguna and Sears
Point (now Infineon Raceway I think?).

Anyways welcome aboard!

Steve Gregory 

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Sylvain Kaufmann
Sent: Tuesday, May 29, 2007 2:49 AM
To: [log in to unmask]
Subject: Re: [TN] SAC/ENIG report

Hi Inge and other netters!

First, thank you Inge for the report and for your welcome.

Well, I didn't know how I would post my first message on TN, here I am!
No, i didn't think you are snob guys, but my forumphobia was stronger!

So, as said below, I'm a technician working for a small electronic
workshop (and would preferably battle with John on Laguna Seca) in a
small mountainy (and snowy this weekend) country and I'm new around
here; hello all and congratulations for the way you make this forum
live.

Have a nice day.
sly



-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of John Burke
Sent: lundi, 28. mai 2007 17:45
To: [log in to unmask]
Subject: Re: [TN] SAC/ENIG report

Welcome Sylvain - greetings from John Burjke - engineer (and would be
full time motorcycle racer) from Santa Clara
California......................

 
 
John Burke
 
(408) 515 4992
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Hernefjord Ingemar
Sent: Sunday, May 27, 2007 11:59 PM
To: [log in to unmask]
Subject: Re: [TN] SAC/ENIG report

Dear Sylvain,

I regret your bad experience from the 'other' forum. What on earth was
that forum? Sounds like being a snob's club. I feel upset.  I promis
you, TechNet is far from that! All are welcome to participate in the
discussions, even doctors.

TechNet is a mix of professionals, lunatics, retireds, amateurs,
supervisors, presidents, designers, purchasers, brokers, consultants,
professors, students....all, but no posh snobs!

So, I'll send the report to you, and at the same time, I ask you to
shake hands with the TechNet gnus electronically. I'm sure you will get
a lot of welcome greetings.

I send parts of your mail to the forum, so that the guys can see there
is a new member. I'm sure you will contribute with good things yourself.
Welcome!

Inge

------------------------------------------------------------------------
---------------------------------

quoted:

 

-----Original Message-----
From: Sylvain Kaufmann [mailto:[log in to unmask]]
Sent: den 24 maj 2007 18:00
To: Hernefjord Ingemar
Subject: SAC/ENIG report

Dear Mister Hernefjord,
Sorry to take contact with you directly when we never met or talk
before.

I am a very little experienced (about 5 years) production technician and
I'm new by IPC's forums. I never worked for mass production and allways
had to manage high mix/low volume production processes and equipment in
a high mix/low volume country.

..............
.............
..............

I saw on IPC Technet forum that could maybe share a very complete report
on ENIG/SAC combination; may I, please, ask for one copy of this report?

I'm sorry to take your time like this, but as a newcomer I didn't want
to post on technet because I thought you could not appreciate a querry
like this from someone you never heard of. I have to admit, too, that I
have been traumatized on another forum, I won't name it, where I have
been "shot down" because I was not any doctor or metallurgist and my
questions were to low-level ones.

Thank you and sorry again for disturbing through your professionnal
e-mail.

Kindest regards.

S. Kaufmann

************************************************************
Sylvain Kaufmann
CERN / European organisation for nuclear research Site de Meyrin
1211 Geneva 23
Switzerland
Dpt: TS-DEM-WS (int mail J06600)
Phone: +41 22 767 37 02
Fax: +41 22 766 87 77
E-mail: [log in to unmask]
Web: www.cern.ch
http://ts-dep-dem.web.cern.ch/ts-dep-dem/
************************************************************

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0 To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing
per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask]
or 847-615-7100 ext.2815
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0 To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET
Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the
posts: send e-mail to [log in to unmask]: SET Technet Digest Search the
archives of previous posts at: http://listserv.ipc.org/archives Please
visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0 To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET
Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the
posts: send e-mail to [log in to unmask]: SET Technet Digest Search the
archives of previous posts at: http://listserv.ipc.org/archives Please
visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2