Hi folks! Just a comment. Some of Werner's comments of Ag embrittlement
are based on some ceramic components with silver plated finishes which
resulted in severe solder joint issues on a series of investigations back
in the SMART conference era. The IPC-4553 Immersion Ag finish group is in
the final stages of finishing up an investigation where Immersion Ag
surface finish was applied to test vehicles in both 1X and 3X thicknesses
plus combine with SnPb and Pbfree soldering processes. The goal of the
testing is to characterizes and determine if silver embrittlement of
solder joint can be created under practical applications. The thermal
cycle testing is complete and 100+ cross sections are undergoing SEM
elemental mapping analysis. The report will be completed this year - keep
an eye on the IPC-4553 group activities.
Dave Hillman
Rockwell Collins
[log in to unmask]
Werner Engelmaier <[log in to unmask]>
Sent by: TechNet <[log in to unmask]>
05/25/2007 08:12 AM
Please respond to
TechNet E-Mail Forum <[log in to unmask]>; Please respond to
[log in to unmask]
To
[log in to unmask]
cc
Subject
Re: [TN] Silver Embrittlement?
Hi Lee,
Au- and Ag-embrittlements are certainly documented?the combined effect is
simply my extension of the phenomena.
Werner
**************************************
See what's free at http://www.aol.com.
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------