REGISTER NOW...

 

Design and Build a Board with Embedded Passive Components:

An Interactive Workshop Hosted by NAVSEA CRANE

June 19-20, 2007 - Crane, IN

Learn and experience how to design and fabricate embedded passives. In
this hands-on workshop participants will use a CAD workstation to design
a PCB with embedded passives and then build it. Topics to be covered
include:

 

* An introduction to Embedded Passives 

* How to utilize both capacitor and resistor materials 

* How to manufacture a finished board, including raw material samples
(inner   layer details will be given to the students) 

* Case studies presented by industry specialists 

* How to solve your embedded passive problems 

 

Information on current commercially available materials for resistors
and capacitors will be provided, including Design for Manufacture (DfM)
and related processes for incorporation into the PCB with emphasis on
(DfM) and test and trim of resistors.  The overview concludes with a
systematic rationale on how to proceed with component and material
selection. 

 

To register for this workshop, please cut and paste
www.ipc.org/EPCrane0607 into your browser and download the registration
form.