Hi Richard,
If you try to solder at or just above the Solidus temperature, you need a
long time to get wetting [it takes thermal energy to dissolve the base metal into
Sn], and you may not get good wetting art all. That is why I recommend
Liquidus+20C for reflow soldering to Cu, and Liquidus+35C for reflow soldering to
Ni. This time above 183 recommendation of 60 to 90 sec is wrong.
Werner
**************************************
See what's free at http://www.aol.com.
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------