TECHNET Archives

April 2007

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Kathy Kuhlow <[log in to unmask]>
Reply To:
Date:
Mon, 9 Apr 2007 09:42:52 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (48 lines)
Marty, 

Are the same areas missing on every board? If so, double check you artwork.
If not, do you have enough good ones to get you through while you send the
rest back or manually rework? You can try to use as is but that is pretty
risky and will probably be inconsistent. You also could have the pads wetted
and then cleaned flat by hand. If you can, send them back and have them
fixed by the supplier. 

Kat

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Marty W. Sheppard
Sent: Thursday, April 05, 2007 12:29 PM
To: [log in to unmask]
Subject: [TN] Missing HASL

We've got some boards on the solder screen printer right now ready to print,

but we've noticed there are a few areas (BGA lands) where the HASL is 
missing from the pad.

Will the solder take to these pads?  If not, what are our options?

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2