TECHNET Archives

April 2007

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"Stadem, Richard D." <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Stadem, Richard D.
Date:
Mon, 2 Apr 2007 06:59:32 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (159 lines)
Also look at IPC 7095 and 7094, there is a lot of good information on
reliability issues with using soldermask-defined pads. Paymon, this is
where soldermask is considered to encroach into the solder joint. Read
particularly IPC 7095 section 8.4.3, and again Werner Engelmaier also
has written some excellent articles on the influence of soldermask on
reliability of BGA solder joints. 

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of John Burke
Sent: Friday, March 30, 2007 12:54 PM
To: [log in to unmask]
Subject: Re: [TN] Solder Resist Encroachment onto BGA pads

I suspect a lot since all of the work on solderability/reliability in
regard to wetting angles was done many years ago. 

Is Werner on the forum?

John

 
 
John Burke
 
(408) 515 4992

-----Original Message-----
From: Paymon Sani [mailto:[log in to unmask]]
Sent: Friday, March 30, 2007 10:15 AM
To: TechNet E-Mail Forum; John Burke
Subject: RE: [TN] Solder Resist Encroachment onto BGA pads

Thank you John, is there any studies on this?

Paymon

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of John Burke
Sent: March 30, 2007 12:45 PM
To: [log in to unmask]
Subject: Re: [TN] Solder Resist Encroachment onto BGA pads

Actually yes.

If you put solder resist over the lands for the BGA you have by
definition a joint defined by the resist system.

Effectively this will give you a 90 degree wetting angle which is - you
guessed it a stress riser.

So a joint with solder mask defined joints will be more liable to crack
under stress.

John
 
 
John Burke
 
(408) 515 4992

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Paymon Sani
Sent: Friday, March 30, 2007 9:02 AM
To: [log in to unmask]
Subject: [TN] Solder Resist Encroachment onto BGA pads

Hello All,

 

Does anybody know why IPC does not allow any solder resist encroachment
onto the BGA copper defined lands for PCBs?


------------------------------------------------------------------------
----
-----------
Confidentiality Notice

This e-mail and any attachment(s) are intended for the individual or
entity to which this email is addressed and may contain information that
is confidential.  If you are not the intended recipient or an employee
or agent responsible for delivering this e-mail to the intended
recipient, please be aware that any dissemination, distribution or
copying of this communication is strictly prohibited.  If you have
received this in error, please notify the sender by telephone at
604.430.4336 or by return e-mail, and please delete or destroy all
copies of this communication.  Thank you!

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0 To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing
per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask]
or 847-615-7100 ext.2815
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0 To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing
per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
-----------------------------------------------------

------------------------------------------------------------------------
----
-----------
Confidentiality Notice

This e-mail and any attachment(s) are intended for the individual or
entity to which this email is addressed and may contain information that
is confidential.  If you are not the intended recipient or an employee
or agent responsible for delivering this e-mail to the intended
recipient, please be aware that any dissemination, distribution or
copying of this communication is strictly prohibited.  If you have
received this in error, please notify the sender by telephone at
604.430.4336 or by return e-mail, and please delete or destroy all
copies of this communication.  Thank you!

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0 To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET
Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the
posts: send e-mail to [log in to unmask]: SET Technet Digest Search the
archives of previous posts at: http://listserv.ipc.org/archives Please
visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2