Designing and Building a Board with Embedded Passive Components:

An Interactive Workshop Hosted by NAVSEA CRANE

April 24-25, 2007 - Crane, IN

Learn and experience how to design and fabricate embedded passives. In
this hands-on workshop participants will use a CAD workstation to design
a PCB with embedded passives and then build it. Topics to be covered
include:

 

* An introduction to Embedded Passives 

* How to utilize both capacitor and resistor materials 

* How to manufacture a finished board, including raw material samples
(inner   layer details will be given to the students) 

* Case studies presented by industry specialists 

* How to solve your embedded passive problems 

 

Information on current commercially available materials for resistors
and capacitors will be provided, including Design for Manufacture (DfM)
and related processes for incorporation into the PCB with emphasis on
(DfM) and test and trim of resistors.  The overview concludes with a
systematic rationale on how to proceed with component and material
selection. 

 

To register for this workshop, please cut and paste
www.ipc.org/EPCrane07 into your browser to download the registration
form.

 

This class will also be held on June 19-20. 2007.

 

 

 


---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------