Subject: | |
From: | |
Reply To: | |
Date: | Tue, 3 Apr 2007 03:47:00 -0700 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Rich:
My suspicion is that questionable wetting of Tin is probably due to oxide formation, and reflow might assist, but only maybe. You would probably get much better results treating the board to remove oxide. And whereas I know how I would do this, I am not aware of products currently commercially available for this purpose.
Rudy Sedlak
RD Chemical Company
Richard Olsen <[log in to unmask]> wrote:
Hello,
Immersion tin on a bare board.
If wet ability under a BGA is in question should you reflow the tin in oil
prior to assembly?
Would this help or no.
Thank you
Rich Olsen
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
---------------------------------
Bored stiff? Loosen up...
Download and play hundreds of games for free on Yahoo! Games.
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|