TECHNET Archives

March 2007

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"Tempea, Ioan" <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Tempea, Ioan
Date:
Wed, 28 Mar 2007 16:13:01 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (83 lines)
Phil,

you are right if we consider a somewhat balanced top-bottom component distribution.

What I am talking about is the case where the heavy stuf, BGAs, heatsinks, transformers, etc, are all on the first side that is soldered, whereas on the second side there are small discretes only, e.g. 0603 and 1206. In this case you can solder the discretes at lower temperatures, but these temperatures are not enough to properly reflow the joints of the first side.

Don't ask me why would I do such a stupid thing, reflow the havily loaded side before the light one. I am simply trying to brainstorm on how to reduce setup times at the reflow oven. And the basic rule of brainstorming says that nothing is stupid a priori.

Thanks,

Ioan

-----Original Message-----
From: TechNet [mailto:[log in to unmask]]On Behalf Of Phillip Bavaro
Sent: Wednesday, March 28, 2007 3:45 PM
To: [log in to unmask]
Subject: Re: [TN] Double sided reflow


Ioan,

Someone can't see the forest because the trees are in the way....lol.

The second side reflow is actually more thermally demanding because it has 
to account for both sides of the board with respect to mass.  Set your 
reflow profile up for the double sided reflow only and use it for both sides.

Phil

At 03:42 PM 3/27/2007 -0400, Tempea, Ioan wrote:
>Dear colleagues,
>
>let's take a board with SMT on both sides. Let's say that for particular 
>reasons we have to solder the more thermally demanding side first.
>
>The question is: when reflowing the second side, the one that requires 
>lower temps because the components are less demanding, may the reflow 
>recipe be colder? Will this affect the other side, that will reflow again, 
>but at lower temps and for not as long? I mean the IMC is already formed; 
>is there anything else that could go wrong?
>
>Or, to generalize, a PCB with SMT parts that were properly reflowed once, 
>can it be reflowed again at lower temperatures, without adverse effects on 
>the metallurgy of the joints?
>
>Thanks for your help,
>
>Ioan
>
>---------------------------------------------------
>Technet Mail List provided as a service by IPC using LISTSERV 15.0
>To unsubscribe, send a message to [log in to unmask] with following text in
>the BODY (NOT the subject field): SIGNOFF Technet
>To temporarily halt or (re-start) delivery of Technet send e-mail to 
>[log in to unmask]: SET Technet NOMAIL or (MAIL)
>To receive ONE mailing per day of all the posts: send e-mail to 
>[log in to unmask]: SET Technet Digest
>Search the archives of previous posts at: http://listserv.ipc.org/archives
>Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 
>for additional information, or contact Keach Sasamori at [log in to unmask] or 
>847-615-7100 ext.2815
>-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2