TECHNET Archives

March 2007

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"Upton, Shawn" <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Upton, Shawn
Date:
Fri, 23 Mar 2007 10:10:48 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (26 lines)
Had a recent question about using a PCB at 105C; I wasn't sure about it.
I usually spec FR4 for HASL finish, FR4 with Td_min=350C/CTE_max=3.5%
for immersion gold finish; and haven't done high temp (150C or more)
yet.  I figured, the board in question was RoHS compliant, so it
shouldn't outgas too quickly at 105C, at least not for brief testing --
but I wasn't sure about prolonged periods.

So, the question is, what is regular FR-4 recommended up to for
temperature?

Shawn Upton, KB1CKT
Test Engineer
Allegro MicroSystems, Inc
[log in to unmask]
603.626.2429/fax: 603.641.5336

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2