Hi everyone,
 
Take a look at the link
http://stevezeva.homestead.com/files/Pad_Damaged.jpg
<http://stevezeva.homestead.com/files/Pad_Damaged.jpg> 
 
Tell me what you think about the pad damage shown.  I have not come
across anything like this before, and was asked by our group leader if
this was acceptable.  My initial thought was this is not acceptable and
we should reject the board.  As always, I wanted to point out the IPC
section that would explain why this is not good.  However, I could not
come across anything except for section 10.2.9 (Laminate
conditions-conductors/lands).  I know there is probably a section I am
overlooking?  
 
There is still a high percentage of the pad intact and no evidence of
lifting.  Is this something common that others have seen?  If so, what
do I tell the board house to look out for to prevent something like this
in the future? 
 
Would anyone accept this?
 
 
 
Thanks,  
 
 
 
 
<http://stevezeva.homestead.com/files/Pad_Damaged.jpg>
 


Jim West
Engineering Manager
Nexergy Inc.
www.nexergy.com
tel: (614) 351-6216
fax: (614) 324-1979



This email message and all attachments transmitted with it are intended solely for the use of the addressee(s) and may contain legally privileged, protected or confidential information. If you believe that you have received this message in error, please notify the sender immediately by email reply and please delete this message from your computer and destroy any copies.

--------------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------