I'm looking for process guidelines to remove a LF Foxtor connector 2x133 on a
LF PCBA.
THe PCB thickness is 100 mils and the Foxtor ground pins are not protruded on
bottom side.
The challenge is having the SM pads and PTH pins at the same time in reflow
without overheating the PCB.
All recommendations are welcome.
Eric Castonguay
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------