Ioan,
Why would you want to design an array like this?
John Parsons
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Tempea, Ioan
Sent: Friday, March 02, 2007 10:23 AM
To: [log in to unmask]
Subject: [TN] Flip-flop panels
Hi Technos,
the flip-flop nickname actually comes from the Technet, I heard it right
here some time (years) ago. What I mean is the panels made up by arrays of
alternating top-bottom patterns.
I know that the layer stackup has to be symmetrical, that the copper weight
has to be symmetrical, but what about the controlled impedance boards? Let's
say a 12 layer PCB, that calls for:
4.0 mil lines: 56 ohm trace impedance +/- 10% layers 2,4,5,8,9,11
6.5 mil lines: 50 ohm trace impedance +/- 10% layers 4,9,11
8.1 mil lines: 45 ohm trace impedance +/- 10% layers 4,8,9
8.0 mil lines: 56 ohm trace impedance +/- 10% layers 1,12
Is this PCB a good candidate for flip-flopping?
And it is just now that I realized it has 12 layers? Any limitations coming
from layer count?
And even better, I have one other board with microvias and blind/burried
vias. Can this be flip-flopped?
Thank you,
Ioan
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|