Hi. My two cents worth:  I always use pin 1 as ANODE and 2 as Cathode. If the 
schematic symbol is made this way and is placed in the proper electrical 
direction that the circuit requires, then the footprint (following the same 
convention) with have the cathode's polarizing mark in the correct position.
(My thinking here is plus to minus vs the military thinking of minus to plus)
 
The parts that throw me for loop are the to-92 transistors. EBC or CBE .. 
I've been bitten a few times on this one because of the different manufacturer's 
pinouts (and also watch for the sneaky datasheet that shows the "solder side" 
instead of the view from top.
 
Pat Johnson
Compu-Tier



************************************** AOL now offers free email to everyone. 
 Find out more about what's free from AOL at http://www.aol.com.

---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
---------------------------------------------------------------------------------