Hi,
I have been asked if there is a standard for creation of footprints 
espicially for diodes. One of the designers reversed the cathode and anode 
causing all the diodes to be placed backwards. The rational was the pin 1 
was the anode for this device for other diodes pin 1 is the cathode.


Gary Bremer CID
Manufacturing Engineer

_________________________________________________________________
Exercise your brain! Try Flexicon. 
http://games.msn.com/en/flexicon/default.htm?icid=flexicon_hmemailtaglinemarch07

---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
---------------------------------------------------------------------------------