TECHNET Archives

February 2007

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"Whittaker, Dewey (EHCOE)" <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Whittaker, Dewey (EHCOE)
Date:
Wed, 28 Feb 2007 07:15:16 -0700
Content-Type:
text/plain
Parts/Attachments:
text/plain (95 lines)
It was the best of times, it was the wurst( but that's a link to another
story) of times and Ken has added a new twist to it. We have just
included FOD in our workmanship section, unless it creates thieving in
the copper field.
Dewey

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Bloomquist, Ken
Sent: Wednesday, February 28, 2007 6:50 AM
To: [log in to unmask]
Subject: Re: [TN] FOD Prevention

Steve,

We took sort of the same approach and developed our own guidelines. We
did add the "Julia Childs" test at the end of assembly... "Shake the
dickens out of it" ;-) and of course listen for anything that might have
snuck into the product.

KennyB

-----Original Message-----
From: Steve Gregory [mailto:[log in to unmask]] 
Sent: Wednesday, February 28, 2007 5:45 AM
To: [log in to unmask]
Subject: Re: [TN] FOD Prevention

Hi James!

There used to be MIL-STD-980, but it since has been canceled. Here's a
link to a pretty good guideline that you could adapt and develop a FOD
control program from:

http://www.nafpi.com/nafpiguideline.pdf

Just eliminate the things that really don't apply to a electronics
manufacturing operation. FOD control is pretty straight-forward.
Clean-up after yourself and everything has it's place pretty much sums
it up...

-Steve Gregory-

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Marsico, James
Sent: Wednesday, February 28, 2007 7:09 AM
To: [log in to unmask]
Subject: [TN] FOD Prevention

Hello technet:

Our company is trying to implement an FOD control system, but most
training materials are geared for aircraft applications. Does anyone
know of a good source for electronic assembly FOD training materials?

 

Jim Marsico

EDO Corporation

1250 New Horizons Blvd.

North Amityville, NY 11701

631-630-5079

[log in to unmask]

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2