Joe Russeau,
Unfortunately, I was not able to attend the APEX show this year (nor
any other year for that matter) but I found it real interesting when
you named Dewey as singing "Friends in Low Places". I used to
frequent a country bar in Colorado where there was a band with the
leader named Dewey. He has since moved to Las Vegas and last I hear
has a county band and plays I believe at the Frontier. I am curious
if this is one in the same Dewey? Would you have a last name for him
or a full band name for his band or possibly even know where he comes from?
Thanks
Gary Warner
SAE Circuits
Boulder, CO
At 11:36 AM 02/26/2007, you wrote:
>I too found the show to be very beneficial. The committee meetings I
>attended were very good and had good participation based on my previous APEX
>visits. The technical presentations that I attended were also very good and
>informative. Unfortunately, I was not able to spend much time on the floor,
>but spoke with a few clients who were there that indicated that foot traffic
>was good. As always, seeing my friends made the trip worthwhile. The Myth
>Busters were awesome. I was impressed with Bev's extensive knowledge of
>flatulence. Also, to the guy who commended the Myth Busters on making a
>family oriented show... my hats off to you for pointing that out. Hollywood
>needs to hear that more often I think. Lastly, the highlight of the show
>for me was seeing Dewey singing "Friends in Low Places" with the Rockwell
>gang at the "It's Your Party" event. For a guy who just had back surgery,
>he moved pretty good.
>
>Joe Russeau
>
>
>----- Original Message -----
>From: "Bev Christian" <[log in to unmask]>
>To: <[log in to unmask]>
>Sent: Monday, February 26, 2007 1:11 PM
>Subject: Re: [TN] APEX
>
>
> > TechNetters,
> > I am not a process engineer, in fact I am not an engineer of any kind,
> > but a scientist, so I had a different perspective. I found that the
> > exhibition had some nifty pieces of equipment that were either new or I
> > did not know about. These included, but are not limited to:
> >
> > Struers (make x-sectioning chemicals and equipment) - They showed me a
> > system where you can put a sample in a special holder, put it in an
> > x-ray machine, zero in on the exact spot that you want to cross-section
> > via the x-ray image, and then take it out and put it in an automatic
> > grinder/polisher and it will prepare a sample to that exact spot.
> >
> > Akrometrix (make the Thermoire) - They now make a microfringe projector
> > which allows warpage measurement of components down to a 1 mm x 1 mm.
> > They also make another Thermoire add-on, a digital image correlation
> > (DIC) module that allows simultaneous warpage measurements of a part on
> > a board and the board AND measure x and y expansion.
> >
> > Soltec (strain gage data acquisition) - They showed me their latest 16
> > and 32 channel data acquisition equipment.
> >
> > ECI Technology (make SERA testers) - Have said they will send their
> > latest recipes. Assure me that I should be able to measure OSP
> > thickness using a different solution.
> >
> > So for me the show was very fruitful. And of course there were the
> > committee meetings and papers.
> >
> > But the main reason I go is to see my friends, but you can never tell a
> > boss that!
> >
> > Bev
> > RIM
> >
> > -----Original Message-----
> > From: TechNet [mailto:[log in to unmask]] On Behalf Of Mike Buetow
> > Sent: February 26, 2007 11:33 AM
> > To: [log in to unmask]
> > Subject: Re: [TN] APEX
> >
> > At the risk of disagreeing with my good friend Phil, I can't remember a
> > show where more new machines were introduced. Yes, many were based on
> > previous platforms, and yes, Cogiscan's RFID feeder was highly
> > interesting, but there were some other breakthroughs, too. One was
> > Viscom's combination AOI/AXI. Vitronics added a software program to its
> > 6745 selective machine that is superb both in design and use. I also saw
> > a couple of really slick dispensers.
> >
> > The problem is, some of the existing machines are already so good we do
> > get a bit jaded and forget how impressive the engineering really is.
> >
> > Mike
> >
> >
> >
> > Mike Buetow
> > Editor in Chief
> > Circuits Assembly
> > 30 Glenburnie Road
> > Boston, MA 02131 USA
> > W/mobile: 617-327-4702
> >
> > Watch our latest on-demand video Webinar!
> > www.pcbshows.com/webinars/ondemand/siemens
> >
> > RoHS in China Webinar: Thursday, Jan. 18, 2 pm EST
> > Register at www.pcbshows.com/webinars
> >
> >
> >
> > ---------------------------------------------------
> > Technet Mail List provided as a service by IPC using LISTSERV 1.8e
> > To unsubscribe, send a message to [log in to unmask] with following text
> > in
> > the BODY (NOT the subject field): SIGNOFF Technet
> > To temporarily halt or (re-start) delivery of Technet send e-mail to
> > [log in to unmask]: SET Technet NOMAIL or (MAIL)
> > To receive ONE mailing per day of all the posts: send e-mail to
> > [log in to unmask]: SET Technet Digest
> > Search the archives of previous posts at:
> > http://listserv.ipc.org/archives
> > Please visit IPC web site
> > http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
> > information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
> > ext.2815
> > -----------------------------------------------------
> >
> >
> >
> > ---------------------------------------------------------------------
> > This transmission (including any attachments) may contain confidential
>information, privileged material (including material protected by the
>solicitor-client or other applicable privileges), or constitute non-public
>information. Any use of this information by anyone other than the intended
>recipient is prohibited. If you have received this transmission in error,
>please immediately reply to the sender and delete this information from your
>system. Use, dissemination, distribution, or reproduction of this
>transmission by unintended recipients is not authorized and may be unlawful.
> >
> > ---------------------------------------------------
> > Technet Mail List provided as a service by IPC using LISTSERV 1.8e
> > To unsubscribe, send a message to [log in to unmask] with following text in
> > the BODY (NOT the subject field): SIGNOFF Technet
> > To temporarily halt or (re-start) delivery of Technet send e-mail to
>[log in to unmask]: SET Technet NOMAIL or (MAIL)
> > To receive ONE mailing per day of all the posts: send e-mail to
>[log in to unmask]: SET Technet Digest
> > Search the archives of previous posts at: http://listserv.ipc.org/archives
> > Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
>for additional information, or contact Keach Sasamori at [log in to unmask] or
>847-615-7100 ext.2815
> > -----------------------------------------------------
> >
> >
>
>---------------------------------------------------
>Technet Mail List provided as a service by IPC using LISTSERV 1.8e
>To unsubscribe, send a message to [log in to unmask] with following text in
>the BODY (NOT the subject field): SIGNOFF Technet
>To temporarily halt or (re-start) delivery of Technet send e-mail to
>[log in to unmask]: SET Technet NOMAIL or (MAIL)
>To receive ONE mailing per day of all the posts: send e-mail to
>[log in to unmask]: SET Technet Digest
>Search the archives of previous posts at: http://listserv.ipc.org/archives
>Please visit IPC web site
>http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
>information, or contact Keach Sasamori at [log in to unmask] or
>847-615-7100 ext.2815
>-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
