Fellow techs,
Receiving Inspection wants to temporarily remove MSDs from their protective
MBB to verify quantities, etc...and has asked me how long a MSD can be
safely left outside its protective, sealed MBB (under normal factory
conditions) before it must be rebaked. I plan on checking J-STD-033 for a
recommendation but would also like to know what the industry consensus about
this subject is and does its MSL affect it?
thanks
Joe
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------