TECHNET Archives

February 2007

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Kevin Glidden <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Kevin Glidden <[log in to unmask]>
Date:
Mon, 19 Feb 2007 14:20:20 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (61 lines)
It depends.  Do you plan on processing them panelized and then depanelizing
them at your facility?  If so I would work WITH the PCB supplier.  Make sure
you within their published panel sizes and you should be OK.   But your
input is paramount, as you will be the one stuck with depanelizing them.
Also, you need to be concerned about edge clearances at areas of mouse bite
or scoring.  But, if you intend to buy them already depanelized, just let
the PCB  shop work their layout on the panel to maximize their yield.


-----Original Message-----
From: Marsico, James [mailto:[log in to unmask]] 
Sent: Monday, February 19, 2007 2:08 PM
To: [log in to unmask]
Subject: [TN] PWB panels

Hello TechNet...

A quick question.  When designing small PWBs, do you design the paneled
array or do you supply a one-up design and ask your PWB supplier to design
the panel for you?

 

Jim Marsico

EDO Corporation

1250 New Horizons Blvd.

North Amityville, NY 11701

631-630-5079

[log in to unmask]

 


---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e To
unsubscribe, send a message to [log in to unmask] with following text in the
BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet
NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send
e-mail to [log in to unmask]: SET Technet Digest Search the archives of
previous posts at: http://listserv.ipc.org/archives Please visit IPC web
site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2