Hi Kevin!

If you have to do this on a LOT of boards, and you're doing it on bare
boards, you might consider this:

 http://www.additive.com/

-Steve Gregory-

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Kevin Stokes
Sent: Tuesday, January 09, 2007 11:39 AM
To: [log in to unmask]
Subject: [TN] PWB Rework - Adding traces

Is anyone out there familiar with the process of adding copper traces to
PWB's instead of wire modifications?  I am investigating this technique
that creates a copper trace, epoxies it to the board and solders the
terminations to the pad.  This is done in place of creating a wire
modification to the board.

 

Is anyone familiar with this process?  Does anyone have experience,
quality data or reliability data associated with it?

 

Kevin

 

Kevin Stokes

Director Global Technical Services (GTS)

Kimball Electronics Group, 1600 Royal Street, Jasper, IN 47549-1001

Phone:  (812) 634-4207                               Mobile:  (812)
630-5196

email:  [log in to unmask] <mailto:[log in to unmask]> 

 


---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET
Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the
posts: send e-mail to [log in to unmask]: SET Technet Digest Search the
archives of previous posts at: http://listserv.ipc.org/archives Please
visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------