I second that, ballpark-wise (large volume - off shore). Last time I had
much real pricing data was a couple of years ago at least, and the rough
calc. I made at that time was slightly higher but board prices were
dropping.
On the other hand, I think the dollar was stronger then...
-Chris
Dwight Mattix <[log in to unmask]>
Sent by: TechNet <[log in to unmask]>
01/24/2007 01:35 PM
Please respond to
TechNet E-Mail Forum <[log in to unmask]>; Please respond to
Dwight Mattix <[log in to unmask]>
To
[log in to unmask]
cc
Subject
Re: [TN] Price Per Square inch for production boards
At 10:12 AM 1/24/2007, Brooks,Bill wrote:
>Thanks Joe...
>
>So are you saying that a 8X10 inch 4 layer board would be 320 square
inches
>times .015 dollars? That would be $4.80-USD per board...
that's in the ballpark for volume offshore pricing I see regularly.
>Hmmm... are we are paying too much?...
depends on your volume, leadtime and where you're sourcing it
>or are the numbers used in the
>calculation in need of some adjustment?
maybe yes. maybe no
>:)
>
>
>Bill Brooks
>PCB Design Engineer, C.I.D.+
>Tel: (760)597-1500 Fax: (760)597-1510
>Datron World Communications, Inc.
>Vista, California
>
>
>-----Original Message-----
>From: Joe Fjelstad [mailto:[log in to unmask]]
>Sent: Tuesday, January 23, 2007 6:26 PM
>To: [log in to unmask]
>Subject: Re: [TN] Price Per Square inch for production boards
>
>There can never be any really hard numbers Bill, because variables are
many
>
>and the devil is always in the details.
>
>That aside, 1.5 cents per layer square inch is a number that has popped
up
>often in the past.
>
>With that as a ranging round, we might see some more accurate rounds
lobbed
>
>in landing a bit closer to the target.... ;-)
>
>Kind regards,
>Joe
>
>
>
>---------------------------------------------------
>Technet Mail List provided as a service by IPC using LISTSERV 1.8e
>To unsubscribe, send a message to [log in to unmask] with following text in
>the BODY (NOT the subject field): SIGNOFF Technet
>To temporarily halt or (re-start) delivery of Technet send e-mail to
>[log in to unmask]: SET Technet NOMAIL or (MAIL)
>To receive ONE mailing per day of all the posts: send e-mail to
>[log in to unmask]: SET Technet Digest
>Search the archives of previous posts at:
http://listserv.ipc.org/archives
>Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16
>for additional information, or contact Keach Sasamori at [log in to unmask]
or
>847-615-7100 ext.2815
>-----------------------------------------------------
>
>---------------------------------------------------
>Technet Mail List provided as a service by IPC using LISTSERV 1.8e
>To unsubscribe, send a message to [log in to unmask] with following text in
>the BODY (NOT the subject field): SIGNOFF Technet
>To temporarily halt or (re-start) delivery of Technet send e-mail to
>[log in to unmask]: SET Technet NOMAIL or (MAIL)
>To receive ONE mailing per day of all the posts: send e-mail to
>[log in to unmask]: SET Technet Digest
>Search the archives of previous posts at:
http://listserv.ipc.org/archives
>Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16
>for additional information, or contact Keach Sasamori at [log in to unmask]
or
>847-615-7100 ext.2815
>-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
"This e-mail message is intended only for the use of the intended
recipient(s).
The information contained therein may be confidential or privileged, and
its disclosure or reproduction is strictly prohibited.
If you are not the intended recipient, please return it immediately to its
sender at the above address and destroy it."
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
