Hi Kitty,
Here's another site : http://www.powerstream.com/Wire_Size.htm
In general, we add .011" to get the finished hole size.
Good Luck,
Andre Demers, C.I.D.
cmrsummit Technologies
Telephone: 613.599.3881
Toll Free: 877.428.1229
Pager: 613.368.0506
Fax: 613.599.7889
-----Original Message-----
From: DesignerCouncil [mailto:[log in to unmask]]On Behalf Of
Cosentino, Tony
Sent: Wednesday, January 24, 2007 9:47 AM
To: [log in to unmask]
Subject: Re: [DC] Hole size vs. Wire Gauge
Kitty,
Here are a few references - the references will help determine the wire
diameter. Be sure to distinguish between solid and stranded wire. Also
be sure to allow for a hole size large enough to account for easy wire
insertion and adequate solder hole fill for your process.
http://www.mogami.com/e/cad/wire-gauge.html
http://www.rbeelectronics.com/wtable.htm
http://www.reade.com/Conversion/wire_gauge.html
http://trueforce.com/encyclopaedia/wire_gauge_table.htm
Thanks
Tony Cosentino
Tekelec
-----Original Message-----
From: DesignerCouncil [mailto:[log in to unmask]] On Behalf Of
Kitty Hines
Sent: Wednesday, January 24, 2007 9:38 AM
To: [log in to unmask]
Subject: [DC] Hole size vs. Wire Gauge
Hi
Can anyone point me to a location of a chart that would show plated hole
diameters for different wire gauges?
Thanks in advance,
Kitty
**This transmission may contain information that is privileged,
confidential and/or exempt from disclosure under applicable law. If you
are not the intended recipient, you are hereby notified that any
disclosure, copying, distribution, or use of the information contained
herein (including any reliance thereon) is STRICTLY PROHIBITED. If you
received this transmission in error, please immediately contact the
sender and destroy the material in its entirety, whether in electronic
or hard copy format. Thank you.**
------------------------------------------------------------------------
---------
DesignerCouncil Mail List provided as a free service by IPC using
LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with
following text in the BODY (NOT the subject field): SIGNOFF
DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET
DesignerCouncil NOMAIL/(MAIL) Search previous postings at: www.ipc.org >
On-Line Resources & Databases > E-mail Archives Please visit IPC web
site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
------------------------------------------------------------------------
---------
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
---------------------------------------------------------------------------------
|
