Subject: | |
From: | |
Reply To: | |
Date: | Thu, 14 Dec 2006 16:54:40 EST |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
In a message dated 12/14/2006 4:24:06 P.M. Eastern Standard Time,
[log in to unmask] writes:
Further still, how does one panel get screwed-up like this and not the
others?
____________________________________
Hi Steve:
That's an interesting picture. I decided it might be best to look at the
photo from the perspective of a client asking me to deliberately create that
particular effect (and with a gun pressed firmly to my head).
For me, it keeps coming back to drill. I could create something like that
through controlled depth drilling. And it can also be done accidentally. Here's
1-way how:
Most low(er) tech PCB designs permit stacked mechanical drilling. Typically
on .062" material a Fabricator can drill 3-high (.062" x 3) with reasonable
results. However, if the drill bit were to slip in the collet it's possible the
drill might not penetrate through all three stacked PCBs. If it went through
the first two PCBs but only partially through the bottom PCB, the effect
would be a partially drilled exit aperture with a pronounce lip.
This theory also offers an answer to your question, "...how does one panel
get screwed-up like this and not the others? By only affecting the bottom
panel, most of the product continues unaffected. As for it being only 1-panel
(so-far) it's possible that the Fabricator actually caught the error and
reworked all but 1 panel (the notorious "escapee").
It's required to note that E/T wouldn't catch this as the PTH is likely
fully functional electrically.
It may also be interesting to note that while most drill machines have
devices or sensors for detecting broken or missing drill bits, not all have the
ability to critically monitor drill bit length.
While I may be way-out with my suggestion, I'll hang onto it until a few
more pictures show different angles (or folks more sane and experienced have
time to respond).
Until then -
Bob
ROBERT LAZZARA
VP, Business Development
T: (800) 560-9457
F: (800) 878-5566 (y servicio de mensaje espaņol)
E: [log in to unmask]
W:_ www.CircuitConnectUSA.com_ (http://www.circuitconnectusa.com/)
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|