TECHNET Archives

November 2006

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Rajesh Dhoum <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Rajesh Dhoum <[log in to unmask]>
Date:
Fri, 3 Nov 2006 12:56:35 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (28 lines)
Has anyone experienced problems related to cracked BGA balls (board
side) applied to electroplated gold (150 micro inches of electrolytic
nickel under 5 - 15 microinches of gold) PCBs using a lead free process?
The cracking is believed to occur during the cool down of the board
after the solder joint has solidified.  The fallout has been minimized
by adjusting the thermal profile through the SMT oven.  Are there any
concerns with the manufacturing process of electroplated gold PCBs that
might affect the solder joint strength?

 

Regards

Rajesh

 


---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2