Subject: | |
From: | |
Reply To: | |
Date: | Wed, 25 Oct 2006 02:00:40 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Dear All:
These are Batch 11 terms . Please review them and give your opinions.
Migration Resistance 迁移阻抗 96.1920
That property of a printed wiring board that resists insulation degradation by electromigration of metal atoms of a conductor under the influence of a difference in electrical potential.
印制线路板抵制变电压影响下金属导体原子的电迁移导致的绝缘退化的特性。
Minimum Annular Width 最小环径 22.0765
The minimum width of metal(s) at the narrowest point between the edge of a hole and the outer edge of a circumscribing land. (This determination is made to the drilled hole on internal layers of multilayer printed boards and to the edge of the plating on external layers of multilayer and double-sided printed boards.)
孔环边缘和焊盘外接面最窄区域额宽度。(此定义适用于多层印制板的内层钻成孔,多层或双面印制板的电镀层边缘。)
Minimum Bump Pitch 最小凸块间距 36.1921
Minimum pitch between the centers of any two perfectly aligned bumps.
两个完全在一直线上的凸块中心点之间的最小间距。
Minimum Electrical Spacing 最小电气间距 21.1451
The minimum allowable distance between adjacent conductors, or between conductors and noncommon conductors such as mounting hardware, ground, etc., at a given voltage and altitude, that is sufficient to prevent dielectric breakdown, corona, or both, from occurring between the conductors.
在特定电压和海拔高度条件下,相邻导体,导体和非导体或贴片硬件或地表之间的最小允许间距。这是为了有效避免导体间的介质击穿和电晕。
Minor Defect 最小缺陷 91.0767
A defect that is not likely to result in a failure of a unit or product or that does not materially reduce its usability for its intended purpose.
不会导致单元或产品失效或非本质上减少预期目的可用性的缺陷。
Mirrored Pattern 镜像线路 24.0768
A pattern whose orientation denotes a transposition from right reading. (See Figure M-4.) 方向与右读规则相对的线路(参见图M-4)
Mis-Pick 缺纬 44.0769
A break in the pattern of cloth from selvage to selvage that is caused by a missing filling yarn.
由于纱填充不足导致的织物织边之间的断层。
Misregistration 重合失调 50.0771
Imperfect registration.
有缺陷的重合。
Mixed Component-Mounting Technology 混合元件贴片技术 70.1452
A component mounting technology that uses both through-hole and surface-mounting technologies on the same packaging and interconnecting structure.
对同种封装和互联结构复合使用通孔和表面贴装的元件贴片技术。
Mixed-Effects Model 混合效果模式 91.0772
An experimental treatment that contains elements of both deterministic effects and random-effects models.
同时包含确定和随即效果模式的实验过程。
Thank you!
IPC TG2-30CN Secretary:Charlotte
|
|
|