TGASIA Archives

October 2006

TGAsia@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Content-Transfer-Encoding:
quoted-printable
Sender:
Subject:
From:
Charlotte Hao <[log in to unmask]>
Date:
Tue, 24 Oct 2006 22:34:29 -0500
Content-Type:
text/plain; charset="GB2312"
MIME-Version:
1.0
Reply-To:
Asia Committe Task Group Forum <[log in to unmask]>, Charlotte Hao <[log in to unmask]>
Parts/Attachments:
text/plain (95 lines)
Dear All:
 
These are Batch 10th terms . Please review them and give your opinions.  
 
Hi 冯志刚, Thank you for your detailed opinions. :)
 
Micron                                                微米                 26.1916

A linear dimension equal to 1 x 10-6 meters or 39.4 x 10-6 inches. ]

数值为1 x 10-6米或39.4 x 10-6英寸的长度因次。

 

Microprobe                                        微探针             92.0760

A small sharp-pointed object with a positional handle that is used to make temporary electrical contact to a land on a semiconductor for testing purposes.

一微小有着尖锐顶端的物体,有着固定的位置通过电接触半导体导电区域以达到测试目的。

 

Microsectioning                                显微剖切         92.1447

The preparation of a specimen of a material, or materials, that is to be used in a metallographic examination. (This usually consists of cutting out a cross-section, followed by encapsulation, polishing, etching, staining, etc.)

待测物品或金相检验物品的准备工作。(通常包含切片,封装,打磨,蚀刻,着色等)

 

Microstrip                                          微波传输带     21.0761

A transmission line (see "Transmission Line") structure that consists of a signal conductor that runs parallel to and is separated from a much wider reference plane. (See Figure M-3.)

由一条信号导线组成的传输线结构 (参见“传输线”),这条导线和一个比它宽许多的参考平面平行且不重合。

 

Microvia (Build-Up Via)                    微通孔 (建立孔)    22.1595

A blind or subsequently buried hole that is <less>0.15 mm [0.006 in] in diameter and formed either through laser or mechanical drilling, wet/dry etching, photo imaging, or conductive ink-formation followed by a plating operation.

直径为 (或小于) 0.15mm [0.006 in] 的盲孔或后期形成的埋孔,激光或机械钻孔成型,湿/干打磨,照片成像,电镀导电油墨。

 

Microwave Integrated Circuit         微波集成电路  21.0762

An integrated circuit that performs at microwave frequencies. 

以微波频率工作的集成电路。

 

Microwave Laminate                        微波层压         40.1917

A laminate of metal cladding on dielectric substrate of composition selected to be suitable for circuit boards intended for operation at microwave frequencies.

绝缘基层上的金属覆层压制,基层材料为适用于电路板在微波频率工作的材料。

 

Microwaves                                       微波                 21.1918

A term generally applied to radio waves in the frequency range of 1 GHz to 100 GHz. It generally refers to the frequency range where circuits and device interconnects are described as distributed elements instead of lumped elements.

适用于频率范围在1 GHz到100 GHz的无线电波的术语。通常指电路和互联器件为分布元件而不是集总元件的频率范围。

 

Migration (Pressure Sensitive Tape) 迁移 (压敏带)   75.1919

The movement between tape components or between the tape and the surface to which it is applied, over a long period of time.

带形元件间或带和贴装表面间的长期移动。

 

Migration Rate                                  迁移率             96.0763

The distance over which metal migration proceeds in a given unit of time. 

特定时间内金属迁移的距离。

 

 

 

Thank you!

 
IPC TG2-30CN Secretary:Charlotte

ATOM RSS1 RSS2