TECHNET Archives

September 2006

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"SUBSCRIBE TechNet S.Badrinarayanan" <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, SUBSCRIBE TechNet S.Badrinarayanan
Date:
Mon, 4 Sep 2006 23:36:53 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (23 lines)
Dear Technets,

Is there a standard that defines a minimum pull force requirement after the
component has been soldered. The issue is, to get a better joint we had
introduced extra solder to the component(confirms to IPC-610D). The
component in question is a SMT type lug which is hand soldered. The
customer tells that excess solder on the lugs would cause the pad peel off
in the field. Do we have a minimum pull force value which can be adopted so
that we can give assurance to customer that there will be no issue with
joints.

Advance thanks for the help.

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2