Hi TechNetters,

Let me ask a question; I know delamination is bad, but why?  What is the
failure mode to the board when a board delaminates and would there ever
be an instance that a board that delaminates is still OK to use?  This
is a Class 3 application.  Yes, I know what the IPC standards say but
not real sure about the board process.  Yes, I "googled" and there is a
lot of stuff out there.  Maybe someone can recommend some reading
material (hopefully short and sweet and to the point).

Thanks!
Helena  

Helena Pasquito
Manufacturing Skills Instructor
M/A-COM, Tyco Electronics
1011 Pawtucket Blvd., M/S 107
Lowell, MA 01853
978-442-5024
[log in to unmask]


---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------