Subject: | |
From: | |
Reply To: | |
Date: | Fri, 8 Sep 2006 13:43:36 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hi Joe!
Asking the question indicates you probably have a problem. I don't
have good news.
The document you want is IPC?JEDEC J-STD-033
It grades bakeouts with respect to moisture sensitivity. Tables are
given for time/temperature. No vacuum information is in this document.
The problem is that the hottest you can take something like a reel is
40C--don't leave one in your hot car! I've tried 80C and they get
seriously warped-unusable. This pushes the bakeout time into the
MONTHS! You're usually better off by paying a taping house to de-tape,
dry, and re-tape. Probably can be done for about $100/reel.
Wayne Thayer
>>> [log in to unmask] 9/8/2006 1:33 pm >>>
Tech,
Hello. Friday is a great day of the week especially when it is our off
Friday like next week (we are on a 9/80 work schedule)!
Questions - where can I find information on common industry practices
to
re-bake MSDs already packaged in tape & reel or tubes? Some say it is
feasible at low temperature with a vacuum oven while others say that
even
this practice may cause component release issues from the tape during
automated smt assembly.
Also, what temperature(s) are tapes, tape & reels and tubes normally
rated
at? Is there an IPC spec that addresses this issue?
Thanks again
Joe
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|