Subject: | |
From: | |
Reply To: | |
Date: | Fri, 4 Aug 2006 15:11:16 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
We have used Indium NC-SMQ92 no-clean solder paste on all our Hi-Rel
Space hardware for 5 years now. We researched the soldering and
cleaning process together at the beginning and developed the perfect
match using heated Kyzen Ionox I3330 with IPA rinse. Perfect cleaning
and no ionic residues. We use this cleaning with a variety of machines.
Rainer G. Blomberg
Staff Production Engineer
Space Systems - Clearwater
Honeywell International, Inc.
* Phone (727) 539-5534
* Fax (727) 539-4469
* Email [log in to unmask]
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Michael Forrester
Sent: Wednesday, July 26, 2006 4:15 PM
To: [log in to unmask]
Subject: [TN] Water Cleaning No Clean FLux from a PCBA
We have a PCBA assembly that requires very low/none ionic
contamination due to high impedance circuitry. Normally we use a water
soluble flux solder paste and wash the PCBAs. Our current vendor only
uses Indium NC-SMQ92 no-clean solder paste. To met the following spec:
Printed Circuit Assemblies shall meet cleanliness standards as per
IPC-A-610 and IPC/EIA J-STD-001.
Testing shall be in accordance with and meet the requirements of IPC/EIA
J-STD-001 Paragraph 8.3.6 or 8.3.7.
they want to use water and Kyzen XJN+ as a saponifier. Has anyone used
this method of cleaning a no clean assembly? If so what was the
result? Any other suggestions?
Thank you.
Best Regards,
Michael Forrester
Sr. Manufacturing Engineer
LeCroy Corp
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET
Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the
posts: send e-mail to [log in to unmask]: SET Technet Digest Search the
archives of previous posts at: http://listserv.ipc.org/archives Please
visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|