IMHO = In my honest opinion
Rgds
Colin
Colin McVean M.Inst.C.T.
Production Manager
Artetch Circuits Limited
Main: 01903 725365
DD: 01903 712926
Email: [log in to unmask]
www.artetch.co.uk
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Habib Sahli
Sent: 29 August 2006 14:49
To: [log in to unmask]
Subject: Re: [TN] Deburring and Polishing Brushess
Hello,
I'm interested in burr-free drilling.
What is IMHO?
Could you please give more informations or links for documentations.
Best Regards.
Habib SAHLI
Engineering Dept.
Tel : 00216 72 451 144
Fax : 00216 72 451 333
E.mail : [log in to unmask]
----- Original Message -----
From: "Brian Ellis" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, August 08, 2006 9:43 AM
Subject: Re: [TN] Deburring and Polishing Brushess
> IMHO, avoiding the production of burrs is a better technique than
> deburring. This implies as near-perfect drill bits as possible, with a
> controlled geometry to very tight tolerances, the correct rotational
> speed, pressure and advance and the use of the correct entry and exit
> materials.
>
> The use of abrasives, in any form, is not advisable, as they
contaminate
> the surface with implanted particles, often swaged over, and the
plastic
> matrix of brushes can cause polymer smearing. It is my experience that
> abrasive cleaning causes more harm than good.
>
> I touched on these matters in more detail in my book. (Section 7.2.3
for
> burr-free drilling, 7.2.4 for deburring and abrasive cleaning)
>
> Brian
>
> Baski Devre wrote:
> > Dear Technetters
> > As you know that prior to dry film coating or LPI soldermask
coating,
> > surface preparation is so crucial. it can directly effect dry film
> > adhesion but we think that deburrinmg of the panels after CNC
drilling
> > operation and prior to electrolytic copper plating is more crucial.
> > Does anybody have an application to deburr and polishing of the
panels
> > after CNC drilling. If yes which type of brushes you use for the
first
> > station to deburr and which type of brushes you use to polish the
bord
> > just after the deburring process.
> > Best Regards
> >
>
> --
> http://www.cypenv.org Cyprus environment/energy
> http://www.cypenv.org/worldenv World environment/energy
> http://www.cypenv.org/weather Cyprus weather
> http://www.cypenv.org/smf/index.php Environment/energy forums
> http://groups.yahoo.com/group/cypnature/ Cyprus nature forum
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 1.8e
> To unsubscribe, send a message to [log in to unmask] with following text
in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
> Search the archives of previous posts at:
http://listserv.ipc.org/archives
> Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask]
or
847-615-7100 ext.2815
> -----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
