We are experiencing fractured solder joints in our manufacturing
process. We know it is caused from the lead trimming we are doing. We do
not have automated equipment that will cut and clinch the leads.
I wanted to reflow the boards a second time until we get our process
under control but not everyone agrees with that. They are afraid of
damage to the components caused by the heat of the reflow. Has anyone
else experienced this issue before and what did you temporarily do to
alleviate the problem while working on the real issue of the lead
cutting process. I have tried visual inspection but these boards are
dense boards and we missed some joints and they were returned to us
again by our Customer.
IPC 610 section 7.5.5.8 states you may reflow and it is not considered
rework. However they mention nothing about reliability if we do this.
Thanks
Sue Runals
QA Mgr.
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------