Agreed. Photcircuits will fabricate pushback pcbs. I don't know first hand
that they get their tooling done by Wand but have no reason to doubt it.
I do know that we use to get all our punch singulation tooling done by Wand
back in the day. As a matter of fact, we use to make our own bareboards
back when were were Delco Products, a lot of which were 'pushback', and we
got all the tooling from Wand. Can't say enough good about Wand Tool. Never
had a problem and gave them some pretty challenging work.
So for Joe, it depends on if you need pushback boards or pushback
tooling....
BR,
-Chris
Mario Irigoyen
<[log in to unmask]> To: [log in to unmask]
Sent by: DesignerCouncil cc:
<[log in to unmask]> Subject: Re: [DC] Singulation
08/23/2006 02:35 PM
Please respond to
mirigoyen1
Photocircuits does it but they don't make tools.
Best regards,
Mario Irigoyen
-----Original Message-----
From: DesignerCouncil [mailto:[log in to unmask]] On Behalf Of Chris
Ball
Sent: Wednesday, August 23, 2006 1:08 PM
To: [log in to unmask]
Subject: Re: [DC] Singulation
Hey Joe-
Photociruits still does it as far as I know.
BR,
-Chris
"Johnson, Joseph SEA"
<[log in to unmask] To:
[log in to unmask]
M> cc:
Sent by: DesignerCouncil Subject: [DC]
Singulation
<[log in to unmask]>
08/23/2006 01:40 PM
Please respond to
"(Designers Council
Forum)"; Please respond to
"Johnson, Joseph SEA"
Does anyone know of any circuit board shops that still does Singulation
dies for PCB's....
This may be called several different things by now.... One of which is
"Punch and Return". This is where the circuit board vendor creates a
punch which exactly matches the board outline and then the board is
punched out of the panel and then at the same instant it is pushed back
into the panel.
Joe J.
----------------------------------------------------------------------------
-----
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV
1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET
DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
----------------------------------------------------------------------------
-----
"This e-mail message is intended only for the use of the intended
recipient(s).
The information contained therein may be confidential or privileged, and
its disclosure or reproduction is strictly prohibited.
If you are not the intended recipient, please return it immediately to its
sender at the above address and destroy it."
----------------------------------------------------------------------------
-----
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV
1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET
DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
----------------------------------------------------------------------------
-----
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV
1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET
DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
---------------------------------------------------------------------------------
"This e-mail message is intended only for the use of the intended
recipient(s).
The information contained therein may be confidential or privileged, and
its disclosure or reproduction is strictly prohibited.
If you are not the intended recipient, please return it immediately to its
sender at the above address and destroy it."
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
---------------------------------------------------------------------------------
|