TECHNET Archives

July 2006

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"Davis, Larry" <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Davis, Larry
Date:
Fri, 7 Jul 2006 12:07:50 -0700
Content-Type:
text/plain
Parts/Attachments:
text/plain (36 lines)
I was wondering if anyone has found a unique way to reduce the amount of
component loss due to the setups and tear downs of SMT feeders.  Our
feeders peel the cover tape back about 2-3 inches leaving several parts
exposed and when the reel is removed from the feeder we typically lose
the parts that are no longer covered unless the operator is extremely
careful. I have had the cover tape "taped" back down in the past but it
really increases the amount of time it takes to load the feeder the next
time due to having to remove the tape.  I know there are feeders from
other companies that have less loss due to the feeder design but there
are a lot of us that have this problem I'm sure.  Just curious how
others handle this.  

TIA for your feedback, 

Larry

This message (including any attachments) contains confidential
and/or proprietary information intended only for the addressee.
Any unauthorized disclosure, copying, distribution or reliance on
the contents of this information is strictly prohibited and may
constitute a violation of law.  If you are not the intended
recipient, please notify the sender immediately by responding to
this e-mail, and delete the message from your system.  If you
have any questions about this e-mail please notify the sender
immediately.

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2