TECHNET Archives

July 2006

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
bob wettermann <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, bob wettermann <[log in to unmask]>
Date:
Tue, 25 Jul 2006 10:57:12 -0700
Content-Type:
text/plain
Parts/Attachments:
text/plain (68 lines)
Joe:

  We are running VJ Tech Summit and Metcal APR5000 (no affiliation  w/either company) and do not have these issues becuase of very large  controlled bottomside heating.

  BWET
  BEST Inc

"Macko, Joe @ IEC" <[log in to unmask]> wrote:  Fellow AIR-VAC Users,



Good morning.

Occasionally, it is a challenge to heat small high mass boards (with a lot
of copper in the inner layers) sufficiently to achieve an acceptable solder
temperature under a larger BGA and maintain component body temperature
within the manufacturer's limits using an EZ style nozzle.



Would any of you DRS24 users like to share your experiences?



What nozzle styles have you found to work best - EZ, ES, MX, or DVG?  I have
heard pros and cons concerning using nozzle that basically cover the BGA and
stand off a few mm from the board (e.g., the delta T between the BGA and
surrounding area is too high because you do not have enough radial heating).



Has anyone modified their station to include some type of post reflow
cooling like the newer Air-VAC machines offer?



Look forward to your reply. Thanks again

Joe




---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please  visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for  additional information, or contact Keach Sasamori at [log in to unmask] or  847-615-7100 ext.2815
-----------------------------------------------------



Bob Wettermann

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
PH 847-767-5745

ATOM RSS1 RSS2