LISTSERV - TECHNET Archives - LISTSERV.IPC.ORG

TECHNET Archives

June 2006

TechNet@IPC.ORG

	LISTSERV Archives
	TECHNET Home
	TECHNET June 2006

	Log In
	Register

	Subscribe or Unsubscribe

	Search Archives

Options:	Use Monospaced Font Show Text Part by Default Show All Mail Headers
Message:	[<< First] [< Prev] [Next >] [Last >>]
Topic:	[<< First] [< Prev] [Next >] [Last >>]
Author:	[<< First] [< Prev] [Next >] [Last >>]

Subject:	Re: How to know if a BGA is properly soldered?
From:	Ted Tontis <[log in to unmask]>
Reply To:	TechNet E-Mail Forum <[log in to unmask]>, Ted Tontis <[log in to unmask]>
Date:	Fri, 16 Jun 2006 13:41:52 -0500
Content-Type:	text/plain
Parts/Attachments:	text/plain (27 lines)

        There is a process that uses dye to penetrate the weak or
fractured solder joints. After the dye has a chance to penetrate it is
washed off and the part is snapped off. Any dye left on the pad would
tell you where your fracture/bad solder joint was at, even if the bad
joint was on the BGA side, not on the board side. The problem with going
the cutting wheel way is that it sounds like you expect the problem to
be at the center of your BGA. By the time you get there, with your
grinder, you would have an opportunity to added enough force and
vibration to cause a failure that my have otherwise not existed. 

Ted 

---------------------------------------------------------------------------------------
Confidentiality Notice

This e-mail and any attachment(s) are intended for the individual or entity to which this email is addressed and may contain information that is confidential.  If you are not the intended recipient or an employee or agent responsible for delivering this e-mail to the intended recipient, please be aware that any dissemination, distribution or copying of this communication is strictly prohibited.  If you have received this in error, please notify the sender by telephone at 604.430.4336 or by return e-mail, and please delete or destroy all copies of this communication.  Thank you!

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2

LISTSERV.IPC.ORG