TECHNET Archives

June 2006

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Steve Gregory <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Steve Gregory <[log in to unmask]>
Date:
Thu, 8 Jun 2006 08:48:31 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (61 lines)
Mornin' Phil,

From your description, it sounds like the pins would wind-up with
nothing more than butt-joints. If it were me, I would be pretty worried.
What is being plugged into these connectors?

A lot of SMT connectors that I've seen have some sort of separate metal
tab at each end that is molded into the body and soldered to help with
the stresses and protect the solder joints of the signal pins. It's
either that or hardware that is installed at each end after soldering to
protect the signal pins solder joints.

I would choose PTH over butt-joints...

-Steve Gregory-  

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Phil Nutting
Sent: Thursday, June 08, 2006 8:37 AM
To: [log in to unmask]
Subject: [TN] Connectors - Surface Mount versus Thru-hole

Good morning colleagues,
 
This is a question of robustness.  I have 3 and 4 pin connectors with
0.045" square pins that are on 0.156" centers.
 
I have a choice between SMT and PTH versions.
 
I see the SMT connectors more manufacturing friendly, but I'm concerned
I will meet resistance in using these as there is the belief that they
will not withstand handling shock in the finished product, a shoe box
sized device that is shipped via UPS, DHL or FedEx.
 
What sage wisdom do you have to share?
 
Phil Nutting

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET
Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the
posts: send e-mail to [log in to unmask]: SET Technet Digest Search the
archives of previous posts at: http://listserv.ipc.org/archives Please
visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2