Sender: |
|
X-To: |
|
Date: |
Wed, 14 Jun 2006 22:21:43 EDT |
Reply-To: |
|
Subject: |
|
MIME-Version: |
1.0 |
Content-Transfer-Encoding: |
7bit |
Content-Type: |
text/plain; charset="US-ASCII" |
From: |
|
Parts/Attachments: |
|
|
Hi Camille,
Most likely you are correct that /99 or /124 might be adequate for your
application. However, be advised that the impact of the soldering temperatures will
vary widely for the materials falling within these slash sheets.
The STII [Solder Temperature Impact Index] can vary for materials falling
within the various slash sheets as follows:
/26: <200
/99: 205-230
/124: 202-up
/126: 225-up
/129: 225-up
Experience has shown that STII=205 has LF-capability limited to thin PWBs,
fully LF-capable materials should have STII=>215, nad that advanced LKF-capable
laminates have STII=>240.
A lot of this is discussed in my multi-client study/white paper: "WHITE PAPER
REPORT: Recommendations for PCB FAB Notes and Specifications in Printed
Circuit Board Drawings for SnPb and Lead-Free Soldering Assemblies, the
Qualification of PCB Shops and Activities to Assure Continued Quality."
Werner
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|