One more thing, Page 41 of MIL-PRF-39017 states that it is an acceptable
substitute for the discontinued MIL-R-39008.  The Dale RLR series meets the
MIL-PRF-39017 spec.
Sincerely,
Dave Dixon
Engineering Technician
Aero-Mach Labs Inc.
7707 E. Funston Street
Wichita, KS     67207-3121
phone    316-682-7707
fax        316-219-2295
www.aeromach.com
 

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of ekalgren
Sent: Tuesday, May 02, 2006 1:09 PM
To: [log in to unmask]
Subject: Mil-Spec resistors

I'm trying to stock our engineering lab with some resistors to use for "select at test."  Currently our drawings call out the use of RCR07 type resistors.  This is an axial leaded carbon film ¼ W resistor.  The problem is that the Mil-Spec governing these guys has been cancelled without replacement and I can't find a source.  Is anyone out there using an equivalent in a Class 3 environment?  Did you have to get approval from the military or is there a blanket approval out there somewhere?

 

Thanks a lot!

 

Eric Kalgren

Electrical Engineer

Continental Tool and Microwave Company

603-775-5200  ext. 333

[log in to unmask]

 

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------