TECHNET Archives

May 2006

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Sender:
X-To:
Leadfree Electronics Assembly Forum <[log in to unmask]>, TechNet <[log in to unmask]>
Date:
Wed, 24 May 2006 07:53:22 -0700
Reply-To:
TechNet E-Mail Forum <[log in to unmask]>, John Burke <[log in to unmask]>
Subject:
MIME-Version:
1.0
Content-Transfer-Encoding:
7bit
Content-Type:
text/plain; charset="US-ASCII"
From:
John Burke <[log in to unmask]>
Parts/Attachments:
text/plain (425 lines)
The EU has been replying but they have the email address wrong I think for
these lists so I am forwarding this.



John



  _____

From: John Burke [mailto:[log in to unmask]]
Sent: Wednesday, May 24, 2006 7:49 AM
To: [log in to unmask]
Cc: [log in to unmask]; [log in to unmask]; [log in to unmask];
[log in to unmask]; [log in to unmask];
[log in to unmask]
Subject: RE: NEW exemption request under ENV:Directive 2002/95 EC Article
5(1)(b)



Dear Mrs Passera,



Thank you for the clarification. Please keep us informed as to when the
request will be submitted to the stakeholder public consultation.



As the evidence submitted covers all applications of soldering under the
terms covered by Article 5(1)(b) on environmental grounds detailed in the
checklist and the scientific data supplied. I believe it is appropriate to
let the description stand since the Directive states:



(11) Exemptions from the substitution requirement should be permitted if
substitution is not possible from the scientific and technical point of view
or if the negative environmental or health impacts caused by substitution
are likely to outweigh the human and environmental benefits of the
substitution. Substitution of the hazardous substances in electrical and
electronic equipment should also be carried out in a way so as to be
compatible with the health and safety of users of electrical and electronic
equipment (EEE).



Based on this wording from the Directive our "very specific" application is
as specifically stated "Exemption request for all electronics assemblies
using lead in solder" as indicated in the Checklist submitted.






I believe we have covered the reasons and the scientific data on the
check-list, and trust that our application for exemption is now "in the
system" - please advise us should this not be the case.



Thanks for your fast response.



Kind regards,



John Burke



  _____

From: [log in to unmask] [mailto:[log in to unmask]]
Sent: Wednesday, May 24, 2006 7:12 AM
To: [log in to unmask]
Cc: [log in to unmask]; [log in to unmask]; [log in to unmask];
[log in to unmask]; [log in to unmask];
[log in to unmask]
Subject: RE: NEW exemption request under ENV:Directive 2002/95 EC Article
5(1)(b)



Dear Mr Burke,

Thank you for your e-mail.

However, I would like to clarify to you the procedure for requesting new
exemptions.

The procedure for the granting the exemptions is quite long - may take from
six months to one year, and when granted, the exemptions are valid for a
period of 4 years and subject to a review pursuant to Article 5(1)(c) of the
Directive. On the procedure:

- the request for exemption has to be precise and refer to a specific
application of the substances of Article 4(1) of the RoHS Directive and can
only be considered if strictly fulfilling the requirements of Article
5(1)(b) of the RoHS Directive.

- submitters have to provide all technical evidence supporting their
request. Article 5(1)(b) of the RoHS Directive is the only criteria and
guideline to be followed for requesting the exemptions.

- all requests for exemption have to be submitted to a public stakeholder
consultation pursuant to Article 5(2) of the RoHS Directive that will last
minimum eight weeks (examples at:
http://europa.eu.int/comm/environment/waste/weee_index.htm.).

- then, the exemptions have to be assessed by an independent consultant.

- on the basis of the results from this review process, the Commission will
decide about presenting further proposals for exemptions to the Technical
Adaptation Committee (TAC) for vote.

This will not be done before 1 July 2006.

The date of the next stakeholder consultation has not been fixed yet.

I hope this information is of help to you.

Best regards,

Anna Passera.



PS: Please note that Ms Klingbeil is no longer working in our departement.


NEW E-mail Address as from 9 May 2006:
[log in to unmask]
Web: http://europa.eu.int/comm/environment/

P Please consider the environment before deciding to print this e-mail.




*********************DISCLAIMER*********************************************
************************************
Disclaimer required under the terms and conditions of use of the internet
and electronic mail from Commission equipment:

"The views expressed are purely those of the writer and may not in any
circumstances be regarded as stating an official position of the European
Commission. A binding interpretation of Community law can only be given by
the European Court of Justice".

****************************************************************************
******************************************




*********************DISCLAIMER*********************************************
************************************

Disclaimer required under the terms and conditions of use of the internet
and electronic mail from Commission equipment:

"The views expressed are purely those of the writer and may not in any
circumstances be regarded as stating an official position of the European
Commission. A binding interpretation of Community law can only be given by
the European Court of Justice".

****************************************************************************
******************************************






  _____


From: John Burke [mailto:[log in to unmask]]
Sent: Sunday, May 21, 2006 3:08 AM
To: PASSERA Anna (ENV)
Cc: 'Nic Bowker'; KLINGBEIL Marianne (ENV); ENV ROHS; '(Leadfree Electronics
Assembly Forum)'; 'TechNet E-Mail Forum'
Subject: NEW exemption request under ENV:Directive 2002/95 EC Article
5(1)(b)

For the attention of  Anna Passera -



Good morning - and I would like to take this opportunity of thanking you and
your team on the excellent attention my various documents have received over
the last few weeks - Thank you so much it is appreciated.



Please confirm receipt of these documents, unless these new applications for
exemption are posted immediately and not just before stakeholder
consultations are announced. Also please let me know when to expect the
stakeholder round 6 public review period.



Thanks and Kind regards,



John Burke



Transcript of the attached application document.



TO:

European Commission

DG Environment, Unit G4 - Consultation Directive 2002/95/EC

B-1049, Brussels, Belgium.

Attention of Anna Passera

20 May 2006



From John Burke, CEO RoHSUSA Inc, Santa Clara California

Subject:-

Exemption application under ENV:Directive 2002/95 EC Article 5(1)(b) for
lead in solders



Dear Sirs,

Article 5(1)(b) of Directive 2002/95/EC provides that materials and
components can be exempted from the substance restrictions contained in
Article 4(1) if their elimination or substitution via design changes or
materials and components which do not require any of the materials or
substances referred to therein is technically or scientifically
impracticable, or where the negative environmental, health and/or consumer
safety impacts caused by substitution outweigh the environmental, health
and/or consumer safety benefits thereof.

The Directive states that:

(5) The available evidence indicates that measures on the collection,
treatment, recycling and disposal of waste electrical and electronic
equipment (WEEE) as set out in Directive 2002/96/EC of 27 January 2003 of
the European Parliament and of the Council on waste electrical and
electronic equipment (6) are necessary to reduce the waste management
problems linked to the heavy metals concerned and the flame retardants
concerned. In spite of those measures, however, significant parts of WEEE
will continue to be found in the current disposal routes. Even if WEEE were
collected separately and submitted to recycling processes, its content of
mercury, cadmium, lead, chromium VI, PBB and PBDE would be likely to pose
risks to health or the environment.

(6) Taking into account technical and economic feasibility, the most
effective way of ensuring the significant reduction of risks to health and
the environment relating to those substances which can achieve the chosen
level of protection in the Community is the substitution of those substances
in electrical and electronic equipment by safe or safer materials.
Restricting the use of these hazardous substances is likely to enhance the
possibilities and economic profitability of recycling of WEEE and decrease
the negative health impact on workers in recycling plants.

(7) The substances covered by this Directive are scientifically well
researched and evaluated and have been subject to different measures both at
Community and at national level.

(8) The measures provided for in this Directive take into account existing
international guidelines and recommendations and are based on an assessment
of available scientific and technical information. The measures are
necessary to achieve the chosen level of protection of human and animal
health and the environment, having regard to the risks which the absence of
measures would be likely to create in the Community. The measures should be
kept under review and, if necessary, adjusted to take account of available
technical and scientific information.

I have highlighted a number of areas in the directive which recent
scientific evidence has revealed to significantly impact the direction of
this directive.

ITEM above  (6) states the Community position on substitution of safer
materials. The evidence submitted with the check lists in this application
prove conclusively not only that such environmentally acceptable substitutes
are not available and that the ones currently offered are several times more
damaging to the environment.

ITEMS (7) and (8) above state that the substances covered by the Directive
are well researched, and take into account international guidelines and
recommendations. Unfortunately it is our belief that the environmental
impact of lead in solders must have been overlooked in this statement,
unless it was made as a part of a "recommendation" since we can find no
support for the statement as applied to this particular materials group.

The only conclusion we can come to is the conclusion that the material
concerned - lead (Pb) used in solder, has been assumed to have the same
environmental benefit by its removal as similar initiatives to remove lead
in paint and gasoline. This may have occurred as a part of the
"recommendation" process. The banning of lead in solders is clearly not only
not beneficial, but all replacements offered are significantly more damaging
environmentally as evidenced by modern scientific analysis of the situation,
by authorities  from both Europe and the USA, which are submitted in support
of this statement.

The closing statement in paragraph (8) "The measures should be kept under
review and, if necessary, adjusted to take account of available technical
and scientific information." This is the reason for this exemption
application on lead in solders - to ask for adjustment through exemption,
and we trust that this application for exemption will be taken in the spirit
in which it is submitted - one of extreme concern that the environment is
going to suffer badly as a result of this lead in solder ban unless the
exemption is granted.

As an example of the environmental issues this will cause unless this
exemption is granted can be seen by a quick review at the "Solders in
Electronics: A Life-Cycle Assessment (472 pages)" document, which
illustrates that the replacements for "leaded" solder generally referred to
as "SAC alloy" have a much higher environmental impact than tin lead solder
in a number of areas such as:

Non-renewable resource use
Energy use
Global warming
Ozone depletion
Water Quality

Particularly tables  ES-4 and ES-5 may specifically be found useful in
comparing environmental impact.

The reports findings in terms of Non Renewable Resources are that:

"The difference between SAC (the replacement solder) and SnPb (the leaded
solder) is 453 kg of NRR per 1,000 cc of solder applied. If this were all
automotive gasoline, this difference is equivalent to 162 gallons of
gasoline. "

So in closing, the replacement materials have a much higher impact on the
environment than the materials that they replace and it is our view that the
exemption for lead in solders for electronics use should be allowed.

Respectfully submitted to the European Commission

May 20th 2006

John Burke

CEO RoHSUSA Inc



[log in to unmask]

http:.//www.RoHSUSA.com



Enclosures:

Lead In solders exemption application.doc - Lead in solders exemption
application prepared and submitted by RoHSUSA Inc

Lead in solders exemption checklist.doc -containing  TABLE I - CHECK LIST
PROPOSALS FOR FURTHER EXEMPTIONS FROM THE REQUIREMENTS OF ARTICLE 4(1)
OFDIRECTIVE 2002/95/EC FOR SPECIFIC APPLICATIONS OF LEAD, MERCURY, CADMIUM,
HEXAVALENT CHROMIUM.

Primary support documents:

lfs-lca-final.pdf  -containing Environmental Protection Agency (EPA) report
Solders in Electronics: A Life-Cycle Assessment (472 pages) August 2005
submitted as evidence.

Stuttgart.pdf - The University of Stuttgart Department of Lifecycle
engineering paper on soldering with and without lead.



Secondary support documents:



JES00C337.pdf  - "Effects of Lead on Tin Whisker Elimination Efforts toward
Lead-Free and Whisker-Free electrodeposition of Tin" by Wan Zhangz and Felix
Schwager



Expo99.pdf - Edwin B. Smith III and L. Kristine Swanger K*Tec Electronics
Sugar Land, TX presented at IPC Printed Circuits Expo 1999.



 ===========================================================================
===========

For those on the CC list you can get the documentation at
<http://www.rohsusa.com/> http://www.rohsusa.com after 5/21/06 and choose
the Exemptions Latest option




---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2