Is there a quick reference available anywhere as to what actually changed in
the newest revision of 610? I attended a seminar back in May of 2005 which
went through the differences but we only received a list of different page
references between Rev C and Rev D sections. That is helpful for those of us
who were familiar with Rev C and want to cross-reference to where the new
information is located in Rev D. However, there is no "list" that I know of
that has each change, section by section, with a "from" and "to" format to
explain what might have changed from acceptable to not acceptable, or vice
versa.

You can also download an "errata sheet" from the IPC website that lists
three pages of errors that should be changed in the Rev D standard. But
again, there is no guidance as to what has changed from acceptable to not
acceptable, and vice versa. Has anyone attempted this and would you be
willing to share the resulting document? I would also be willing to proof it
against the standard if you don't have time to...

Thanks!
Dale Ritzen
Quality Manager
Austin Manufacturing Services

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------