Mornin' All!

I've just got the opportunity to work with a new vapor phase reflow
system here at my new position. It's a RD Technologies RD3 with a vapor
recovery system. We're in the process of hooking it up, we haven't yet
started it up.

I worked with a vapor phase many years ago (1988), and this system is
much nicer than what I remember about the system I worked with in the
past.

I was wondering if there are any RD Technologies users out there that
have any "words of wisdom" that they might share with me about the
system I'm that going to be working with. BTW, we're going to using
Galden heat transfer fluids.

Kind regards,

-Steve Gregory-
Senior Production Engineer
OAI Electronics
6960 East 12th Street
Tulsa, Oklahoma 74112

(918) 836-0507
(918) 706-2779 CELL
(918) 836-0184 FAX

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------