TECHNET Archives

March 2006

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Mike Fenner <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Mike Fenner <[log in to unmask]>
Date:
Fri, 3 Mar 2006 00:30:42 -0000
Content-Type:
text/plain
Parts/Attachments:
text/plain (110 lines)
Hi Eric
Well ....naturally they will use the change associated with lead free as an
opportunity to promote their products.  As Leigh is a development chemist at
Humiseal/Concoat and the Manager of their cleaning products he will
naturally promote the use of cleaning chemicals in conjunction with
conformal coatings. I don't think that is a bad thing necessarily, its a
point of view.

For information: we did and do work closely with Leigh at Concoat and did
contribute information and materials to him which he used to generate
numbers for this paper. The primary intention intention is that this  data
(with coating and with out) can be used by our mutual customers in the same
way as the analogous cooperations with Zestron and Kyzen.
We are also working with Leigh and other development chemists at Concoat in
the generation of data for coating uncleaned flux residues. This is a more
complex project so we do not have an output yet. Part of my agenda this week
is project definition and resources for this. Presently our plan is for
completion end of Q2 (However was Q1, and before that Q4 /2005), the delays
are externally caused 9by our having to wait for standards committees etc.
for example)




Regards

Mike




  _____

From: [log in to unmask] [mailto:[log in to unmask]] On Behalf Of Eric Bastow
Sent: 02 March 2006 15:13
To: Mike Fenner
Subject: [tech] Conformal Coating Propaganda {01}



After looking at this article, my impression is that the conformal coating
people are using the transition to Pb-Free as an opportunity to "scare"
people into cleaning no-clean Pb-Free residues for the sake of making their
(the conformal coating people) lives easier. The article was penned by a
"development manager" at Humiseal. Am I right in thinking this way?



http://circuitsassembly.com/cms/index.php?option=com_content
<http://circuitsassembly.com/cms/index.php?option=com_content&amp;task=view&
amp;id=2939&amp;Itemid=0> &amp;task=view&amp;id=2939&amp;Itemid=0



Best Regards,

Eric Bastow, CSMTPE

Technical Support Engineer

Southeastern US

Indium Corporation of America

E-Mail: [log in to unmask]

Phone: 315-853-4900 ext. 7504

Cell Phone: 315-534-3487














***This email, its content and any files transmitted with it are intended
solely for the addressee(s) and may be legally privileged and/or
confidential. If you are not the intended recipient please delete and
contact the sender by return and delete the material from any computer. Any
review, retransmission, dissemination or other use of, or taking of any
action in reliance upon, this information by persons or entities other than
the intended recipient is prohibited.

Messages sent via this medium may be subject to delays, non-delivery and
unauthorized alteration. This email has been prepared using information
believed by the author to be reliable and accurate, but Indium Corporation
makes no warranty as to accuracy or completeness. In particular, Indium
Corporation does not accept responsibility for changes made to this email
after it was sent. Any opinions or recommendations expressed herein are
solely those of the author. They may be subject to change without notice.***


---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2