Thanks Jon, that looks like a possibility. I will have our lab check it
out first - product quality is more important than convenience.
Re the other comments people have made, I do agree that gloves are
preferable - but are difficult to use all the time.
- Graham
>>> [log in to unmask] 03/27/06 03:57PM >>>
In a message dated 3/27/2006 2:27:22 PM Eastern Standard Time,
[log in to unmask] writes:
I just checked a few of the wipes on the JNJ Industries website:
http://www.jnj-industries.com. The products' MSDS I checked caused
skin
irritation at various levels, depending upon exposure. You probably
could
clean the hardware successfully with their wipes, but I would not want
to
clean my hands with this material.
++++++++++
I believe you looked at the wrong product on their web site. The
product
that is intended to be a hand cleaner - Benchtop Electronic Hand
Cleaner wipes
- says the following:
"
CFC & HCFC FREE, Fast Drying, Pleasant Odor, No Residue (Amine, Salt,
&
Silicone Free), No Rinse, Spill & Splash Proof
GlobalTech® Benchtop Electronic Hand Cleaner has been laboratory
certified
to be effective in the removal of lead and other toxic metals from all
surfaces including the skin. Designed to be used at the workbench or
any location
where operators' hands become soiled. Cleans hands, surfaces,
fixtures and
tools without requiring the operator to leave the work area. Designed
for
operators and technicians who routinely handle soldered PC boards and
assemblies,
solder reflow, wave soldering, solder paste screening, tin/lead
plating and hot
air solder leveling processes. GlobalTech's hand cleaner leaves skin
soft
and clean, and eliminates contaminant discharge down the drain. "
Here is the MSDS -
http://www.jnj-industries.com/PDFFiles/behc.pdf
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|