I have a connector mounted to my PCB by two screws and associated hardware.
During my selective soldering process I occasionally get a small amount of
solder on the side of the screw head and wetted to the pad under the screw
head. I can find nothing in the IPC spec to indicate if this is OK or not. I
am currently building to class 2 requirements. Thanks in advance for your
input.



Joel Mearig

Delta Tau Data Systems, Inc.


---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------