Mornin' Everybody!

Last Friday, I had a problem with a new part that I've never used
before, and maybe somebody else has seen this problem. It's with
something called an ESD Suppressor. It's a little 0603 SMT part that
looks a lot like a LED...in fact, that's what I thought it was at first.
It's made by Littlefuse.

My problem is that there's a little green piece of plastic on the top of
it that looks like it's held there with a tiny dot of glue, that is
either coming off or breaking during wash. I'm washing the boards in a
batch cleaner using Kyzen Aquanox 4512P at 140 F. for 20-minutes
followed by a ambient temperature rinse cycle, and a 15-minute 100 F.
dry cycle.

I did read in the datasheet that I'm probably washing at too high a
temperature. The datasheet says that they have been tested IAW ASTM-543
for 4-hours at 40 C., with 3 solutions (H2O, detergent solution, and a
defluxer). I didn't know that there was this limitation until we
observed the little green pieces of plastic coming off. You can see a
picture at: 

http://stevezeva.homestead.com/files/ESD_Suppressor.jpg

My question is; what is that little green plastic piece? There's nothing
in the datasheet that describes it. Is it something functional to the
part? Or is it something there for pick and place? I've got a call into
Littlefuse and I'm just waiting for a call back. But I thought I'd ask
you all to see if someone else has run across these little guys before.
I don't have a clue about them...

Have a good Monday!

-Steve Gregory-



_______________________________________________________
This message may contain information that is privileged and confidential to LaBarge, Inc. It is for use only by the individual or entity named above. If you are not the intended recipient, you may not copy, use or deliver this message to anyone. In such event, you should destroy the message and kindly notify the sender by reply e-mail.


---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------