Subject: | |
From: | |
Reply To: | |
Date: | Wed, 29 Mar 2006 05:50:59 +0700 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Dave,
I always suggest reading the manufacturer's information. Philips should know how to use their own parts.
Please visit ............
http://www.semiconductors.philips.com/acrobat_download/various/Surface_mount_reflow_soldering.pdf
On page 16 they discuss the recommendations for large pads and thermal attachment.
The numbers are 20-35%, not 70%. remember, this may change by component manufacturer, so the other guys may be right about 70%, but for the components they are using.
Good Luck
Steve Mikell
[log in to unmask]
> ----- Original Message -----
> From: "Dave Seymour" <[log in to unmask]>
> To: [log in to unmask]
> Subject: [TN] SO8 with Heatslug
> Date: Tue, 28 Mar 2006 10:30:33 -0500
>
>
> Currently using a Phillips part,
>
> http://www.semiconductors.philips.com/pip/NE57814DD.html
>
> This is a standard SO8 package with a large "heat slug pad" under the part.
>
> During reflow the part is floating off center and causing shorts to the
> lead pads.
> I believe this because of the the volume of paste in the heat slug area
> is lifting the
> part up and surface tensions take over.
>
> I have a call into tech support at Phillips, but I figured I would query
> while waiting for a call back.
>
> What is the recommended volume of solder paste under this device ?
>
> What is the recommended solder mask opening(s) under this device?
> - Something like 4-6 smaller opening over a continuous top side
> ground plane?
>
> What is the recommended paste printing pattern under this device?
> - match the soldermask openings?
>
> Does anyone have experience with such a device?
>
> Thanks,
>
> Dave
>
>
> --
> Dave Seymour, CID+
> Catapult Communications Inc.
> 800 Perimeter Park Dr, Suite A
> Morrisville, NC 27560
>
> Direct: (919)653-4249
> Main: (919)653-4180
> Fax: (919)653-4297
>
> [log in to unmask]
>
--
___________________________________________________
Play 100s of games for FREE! http://games.mail.com/
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|