Good Morning Rich,
Appendix C of J-STD-001 references IPC-9201 for guidance on SIR testing
and IPC-TM-650 Method 2.6.3.3.
Based on past experience, I'm sure Mr. Dew (Doug Pauls) could be very
enlightening on this subject!

Steve Sauer
Sr. Manufacturing Engineer
Northrop Grumman, Xetron
Cincinnati, OH
513-881-3368 (v)
513-881-3298 (f)
[log in to unmask] 
 

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Richard Kraszewski
Sent: Tuesday, February 07, 2006 9:24 AM
To: [log in to unmask]
Subject: [TN] IPC - SIR Flux Qualification Standard

There is an IPC document dealing with the change of flux used to produce
an assembly.  I believe that it states that you need to perform SIR
testing on 10 assemblies, without failure

Does anyone know this document number?  

I'm not referring to the SIR requirements in J-std-004 or -005, or the
subsequent test method refereed to in those. 

Rich K - KEDS

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------