TECHNET Archives

February 2006

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
EIMCNews <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, EIMCNews <[log in to unmask]>
Date:
Mon, 13 Feb 2006 20:41:13 -0800
Content-Type:
text/plain
Parts/Attachments:
text/plain (23 lines)
Bill,

Thanks, you answered the question very well.  Holes, after plating, are not
all the same size and that was all I was driving at.  If every hole on a
given board was drilled to the same size those holes would not all be the
same size after plating.  For instance, holes on the perimeter would be
smaller after plating, thus making assembly and insertion tolerances a
variable that could present problems.

Regards,

Roger Mouton

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2